AL-2000 - Industrial Sectional Doors

AL-2000

The most attractive heavy-duty aluminum door!

The Thermostop™ AL-2000 door is robust, durable and yet pleasantly attractive.

It is your definite solution for applications requiring natural daylight and clear visibility, with durability and performance as criteria of selection.

Since 1990, the AL-2000 doors have been appreciated and widely used for applications such as :

Wind load design criteria

Doors to withstand a wind load of 21psf (velocity of 90.5 miles/hour) with a maximum horizontal deflection of 1/120 of opening width.

Size capacity Doors up to 30' wide by 24' high (9144mm wide by 7315mm high)
Reference product

Thermostop™ AL-2000 :

  • type A1, A2, A3 or A4
  • type B1, B2, B3 or B4
Thickness 2" (50mm) thick.
Manufacturing process All tubular extrusions assembled using full length through bolts. Welding is not permitted in any part of the process.
Joint and seal Door sections have an authentic tongue-and-groove joint. The horizontal seal between the sections are of foam rubber type.
Solid sections Type A

Aluminum Paneled secions

Type A1, A2, A3 or A4

16ga. (1.30mm) thick aluminum panels, smooth clear anodized finish, set in U-shaped vinyl gaskets and securely retained in place with a rigid snap-on moulding.

Type B

Mark II polyurethane insulated sections

Type B1, B2, B3 or B4

16ga. (1.30mm) thick aluminum panels, smooth clear anodized finish, set in U-shaped vinyl gaskets and securely retained in place with a rigid snap-on moulding.

Glazing Thermo glass / Single glass / SDP-16 Polycarbonate

Glazing sealed with watertight closed-cell foam tape and securely retained in place with a rigid vinyl snap-on moulding.

  • 1/8" (3mm) single glass
  • 5/8" (16mm) sealed glass
  • Tinted glass
  • Tempered glass
  • Polished wire glass
  • Low-E glass
  • SDP-16 polucarbonate
Finish

Standard

Standard clear-anodized
Clear anodized

Optional anodized color

Champagne
Champagne
Light bronze
Light bronze
Dark bronze
Dark bronze
Black
Black

Optional painted color

Color chart

Color chart

Reinforcement
Built-in fin on a female rail

Built-in fin on a female rail

Aluminum T-struts

Aluminum T-struts

When required, the horizontal members are adequately reinforced with integral reinforcing fins and aluminum T-struts. No steel reinforcing struts are permitted.

Weather seal
Plan view details

Plan view details

Perimeter weather seal

Perimeter weather seal

Bottom weather seal

Bottom weather seal

Pedestrian door (optional)
Pedestrian door

Standard 34" (W) x 78" (H)

Exhaust (optional) Exhaust

4" (100mm) aluminum exhaust port located at the bottom section, factory installed.