Crystal®

The most attractive residential door!

Crystal

With its pleasant and modern look, the Thermostop™ Crystal door will enhance the striking contemporary appearance of your home. The Crystal door adds more natural light to your home and is your long lasting door investment thanks to its corrosion resistant aluminium construction and its robust and impeccable design.

Thickness

2” (50 mm) thick.

 
Manufacturing process

All tubular extrusions assembled using full length through bolts. Welding is not permitted in any part of the process.

 
Joint and seal

Door sections have an authentic tongue-and-groove joint. The horizontal seal between the sections are of foam rubber type.

 joint and seal
Finish

Standard

Standard clear-anodized
Clear anodized

Optional anodized color

Champagne
Champagne
Light bronze
Light bronze
Dark bronze
Dark bronze
Black
Black

Optional painted color

Color chart

Color chart

Glazing options

Glazing sealed with watertight closed-cell foam tape and securely retained in place with a rigid vinyl snap-on moulding.

  • 1/8" (3mm) single glass
  • 5/8" (16mm) sealed glass
  • Tinted glass
  • Tempered glass
  • Polished wire glass
  • Low-E glass
  • SDP-16 polycarbonate

glass all

single or thermo glass

Single or thermo glass
fully glazed sections

SDP-16 Polycarbonate

SDP-16 Polycarbonate
fully glazed sections

Reinforcement

When required, the horizontal members are adequately reinforced with integral reinforcing fins. No steel reinforcing struts are permitted.

femelle fin
Seals

Perimeter weather seal:

3-lip, flexible PVC weather seal.

perimeter weather sear resid

Bottom weather seal:

U-shaped, flexible PVC weather seal.

detail coupe froid bas
Hardware

High quality 2” hardware, model 50-T.

 

Springs:

Oil tempered, helically wound and designed to suit the weight of each door and withstand a minimum number of 10,000 cycles (open/close) over its life.

hardware resid ressort

Tracks:

50 mm (2”) vertical and horizontal tracks formed from 1.99 mm (14 GA) thick galvanized steel. Vertical tracks shall be taper-mounted for a “wedge-tight” closing.

hardware resid rails

Rollers:

50 mm (2”) in diameter with nylon roller head. 100 mm (4”) stainless steel stem. Bulged shoulder. Spin riveting.

hardware resid roulletes

Hinges:

2.37 mm (13 GA) thick galvanized steel, graduated to ensure a weather tight closing at the jambs.

hardware resid pentures
Motor and electrical accessories

The motor and the electrical accessories are made in Germany.

el acces moteur

Silent German belt-driven motor

transmitter

Transmitter
 

keypad

Keypad
 

wall control panel

Wall
control panel

photocell

Photocell