Join our Email List

Clear      Submit

Online catalog 

Jackshaft Operators & Motors - Industrial Sectional Doors

Operators

Motors categories and features
Medium Duty Heavy Duty Extra Heavy Duty
XTRA-LT

XTRA-LT

XTRA-LH

XTRA-LH

Features :
Operation mode : jackshaft or trolley

  • High starting torque motor with overload protection
  • Heavy duty 4L V-belt
  • 3/4" ball bearing on pulley shaft
  • 1" ball bearing on final drive shaft
  • 24V fused control circuit
  • C-2 wiring standard
  • External radio control terminal strip
  • Three-button control station
  • Fully adjustable rotary limit switches
  • Adjustable friction clutch
  • Solenoid brake standard
XTRA-H

XTRA-H

XTRA-HHD

XTRA-HHD

XTRA-T

XTRA-T

XTRA-TB

XTRA-TB

Features :
Operation mode : jackshaft or trolley

  • Heavy duty reversing contactor c/w electrical interlock
  • Continuous duty motor with overload protection
  • Heavy duty 5L V-belt
  • 3/4" ball bearing on pulley shaft
  • 1" ball bearing on drive shaft
  • 24V fused control circuit
  • C-2 wiring standard (constant pressure close)
  • External radio control terminal strip
  • Three-button control station
  • Fully adjustable rotary limit switches
  • Adjustable friction clutch
  • Solenoid brake standard (optional for XTRA-H and XTRA-T)
XTRA-GH

XTRA-GH

XTRA-GHC

XTRA-GHC

Features :
Operation mode : jackshaft

  • Heavy duty reversing contactor c/w electrical interlock
  • Continuous duty motor with overload protection
  • Heavy duty worm gear in oil-bath reducer
  • 1-1/4" or 1-3/8" cast iron flange bearing on output shaft (XTRA-GHC)
  • Rigid steel wall mounting frame on gear box (XTRA-GHC)
  • 24V fused control circuit
  • C-2 wiring standard (constant pressure close)
  • External radio control terminal strip
  • Three-button control station
  • Fully adjustable rotary limit switches
  • Solenoid brake standard
Table of selection
Application Cycles per
hour		 Model * Type ** Drive Power range Maximum weight as
per power		 NEMA options*** Motor duty Voltage (phase) Solenoid brake
Medium duty 15 XTRA-LH jackshaft** belt 1/2 hp up to
500 lbs		 1 intermittent 115 / 230 (1 phase) standard
Medium duty 15 XTRA-LT trolley belt 1/2 hp up to
500 lbs		 1 intermittent standard
Heavy duty 25 XTRA-H jackshaft** belt 1/2, 3/4,
1 hp		 600, 900, 1200 lbs 1, 4, 7, 9, 12 continuous 115 / 230 (1 phase) optional
Heavy duty 25 XTRA-HHD jackshaft** belt 1/2, 3/4,
1 hp		 600, 900,
1200 lbs		 1, 4, 7, 9, 12 continuous standard
Heavy duty 25 XTRA-T trolley belt 1/2, 3/4,
1 hp		 600, 900,
1200 lbs		 1, 4, 7, 9, 12 continuous 230 / 460 / 575
(3 phases)		 optional
Heavy duty 25 XTRA-TB trolley belt 1/2, 3/4,
1 hp		 600, 900,
1200 lbs		 1, 4, 7, 9, 12 continuous standard
Extra heavy duty 30 XTRA-GH jackshaft** gear 1/2, 3/4,
1 hp		 600, 900,
1200 lbs		 1, 4, 7, 9, 12 continuous 230 / 460 / 575
(3 phases)		 standard
Extra heavy duty 30 XTRA-GHC jackshaft** gear 1, 1-1/2 hp 1300, 1600,
1900 lbs		 1, 4, 7, 9, 12 continuous standard

* All motor models are equipped with logic relay.

** All jackshaft motors are equipped with emergency chain hoist.

*** NEMA: 1=general use|4=watertight|7=dangerous locations (gases)|9=dangerous locations (dust)|12=protection (dirt and liquids)
Actuation devices
Control station

A variety of control stations that meet various NEMA requirements. With single, double and triple button stations. As well as triple with key lock-out, triple with key lock-out and pilot light. Key switch. Card reader or keypad.

Three-button standard

Three-button
standard

Three-button with key lock-out

Three-button with
key lock-out

Three-button with key lock-out & pilot light

Three-button with
key lock-out
& pilot light

Key switch

Key switch

Keypad

Keypad
Radio control

Transmitters : One, two or four-button transmitters provide convenient remote actuation.

One-button transmitter

One-button
transmitter

Two-button transmitter

Two-button
transmitter

Four-button transmitter

Four-button
transmitter

One-channel receiver

One-channel
receiver
Safety
Loop detector

Loop detector
24/110V
with harness

Motion detector

Motion detector

Reflector

Reflector

Photo-cell

Photo-cell

Pneumatic safety edge

Pneumatic safety edge

Extra sensitive electro-mechanic edge

Extra sensitive
electro-mechanic edge
Miscellaneous accessories
Utility switch

Utility switch

Time delay

Time delay

Traffic light

Traffic light

Closing timer

Closing timer
Required clearances & support plate details

Jackshaft operator

Jackshaft operator

Jackshaft model Motor dimensions
a (width) b (height) c (depth)
XTRA-LH 15-1/2" 18-1/2" 10"
XTRA-H 16-3/8" 18" 16"
XTRA-HHD 16-3/8" 24" 12"
XTRA-GH 15-3/4" 32-1/4" 19-1/2"
XTRA-GHC 15-3/4" 29-1/2" 16-5/8"

Notes : For more details on support plate dimensions and location, please consult with Thermostop technical services.

Trolley operator

Trolley operator

Trolley model Motor dimensions
a (width) b (height) c (depth)
XTRA-LT 11-7/8" 10" 18-1/2"
XTRA-T 13-1/8" 11-7/8" 24"
XTRA-TB 13-1/8" 12" 24"

 

Notes : Trolley motors are only compatible with Standard and Low-headroom elevations. The installations requires an additional 4" on the headroom clearance and an additional 60" on the depth clearance.